Where To Buy To find your nearest Qubino dealer visit: http://qubino.com/where-to-buy/
The Flush Shutter controls the motors of blinds, rollers, shades, venetian blinds, etc. It can be paired with a digital temperature sensor (sold separately).
MANUALLY ADDING THE DEVICE TO A Z-WAVE NETWORK (MANUAL INCLUSION)
- Enable add/remove mode on your Gateway
- Connect the device to the power supply (with the temperature sensor already connected*)
- Toggle the switch connected to the I1 terminal 3 times within 3 seconds OR If the device is powered by 24 V SELV supply, press and hold the S (Service) button between 2 and 6 seconds
- A new multi-channel device will appear on your dashboard *If connecting the temperature sensor, switch off the power supply and make sure the device is excluded from your network BEFORE connecting the sensor.